when you receive the HP Envy 110 Paper Jam alert message on the control panel of the printer, the below steps help you get out of the issue.
Remove extra sheets present from the input tray and the output tray.
Before you attempt to take out extra papers from the tray, power off the printer.
Plug out the USB cable from the printer’s rear end. Do the same for the power cord also.
Push the tab on the left side of the rear access door to unlock the door.
Drag the door away from the printer and remove it. Gradually remove any jammed paper from the rollers.
Refit the rear access door and gently push the door forward until a snap sound is heard.
Link the power cord to the printer’s rear end. If the carriage inside the printer is not properly displaced, the paper jam issue occurs.
To check the movement of the carriage, power on the printer, open the access door.
Stay calm until the printer comes to the idle state. Plug out the power cord when the printer is on.
Remove the power cord from the wall outlet and the USB cable from the printer’s rear end.
Take out the paper output tray and look if any paper or objects that might restrict the carriage movement.
After removing all stuck papers, reattach the paper output tray, and close the carriage access door.
Plug out the power cord to the printer’s rear end and re- establish the power cord connection.
Power on the printer and let it print a sample page to check if no hp envy 110 paper jam issue exists.
Do You Need Printer Solutions?
123-hp.business provide you with technical solution and is an independent service provider for third party products. The images, products, brands and names displayed on the website are of third party providers, used to furnish information. We do not own or claim any affiliation or endorsement of the third party products listed on our website. Driver can be downloaded from our website.