How To Install HP Envy 4520 Ink Cartridge

Step 1: Here we provide the instructions on how to install the ink cartridge into the HP Envy 4520 printer slot for the first time.

Step 2: Unwrap the newly purchased ink cartridges. Cautiously take out the cartridges from their packaging and keep them face up on a solid surface . This is done to avoid leaking.

Step 3: Align each cartridge in the order you are going to install them into the printer. It should be in the order of cyan, magenta, yellow, black respectively.

Step 4: Go ahead with the instructions provided here to install your new cartridge into the printer.

Step 5: On prior to installing your new cartridges, eliminate the protective strip from each section.

Step 6: Locate each section into the cartridge carriage in the appropriate order until each one fits into place. Shut the cartridge door and the HP Envy 4520 printer lid with care.

Step 7: If you are using genuine HP cartridges, the printer will send an acknowledge message stating that you are using genuine ink. If you are using unauthentic you might receive message notifying that non-genuine HP cartridges have been installed.

Step 8: After installing the ink cartridge into to the HP Envy 4520 printer manually, you will receive on your desktop. click confirm to let the printer to start and prime the system with the new cartridges.

Step 9: Once this is completed, your HP Envy 4520 printer prompts you to do an all-important alignment test. To perform this, place the paper into the HP Envy 4520 printer and click okay to commence the alignment process

Step 10: You can check print quality now. If the print quality is poor, you are supposed to clean the clean the cartridges. You can carry out this either physically, or by following the mentioned sequence of commands (settings > tools > clean cartridges).